Denon DRA-100 Owner's Manual page 78

Contents Connections
Audio Out
You can set whether to "Fixed" or "Variable" the analog audio output level.
Fixed Fixes the analog audio output level.
You can adjust the analog audio output
level using the VOLUME df buttons on the
Variable
remote control.
(Default):
The analog audio output volume is linked to
the Speaker volume.
NOTE
0 Note that the analog audio output level changes to the maximum when the analog
audio output setting is changed from "Variable" to "Fixed".
0 Before changing the settings, turn the volume of the amp connected to the AUDIO
OUT connectors to the minimum volume.
Front panel Rear panel
Playback Settings
Language
Set the language for display on the menu.
English / Deutsch / Français / Italiano / Nederlands / Español /
Svenska / Русский / Polski (Default :English)
Auto-Standby
When "Auto-Standby" is set to "On", and no operations are made in the
stopped state for the set amount of time, this unit automatically enters
standby mode.
For the input source "Tuner" and "From iPod" only, when no operation is
performed for eight hours, this unit automatically enters the standby mode.
1min / 5min /
15min / Other
(Default : 15min):
Off:
Remote control 78
unit
Tips
When "Other" is selected, the "Auto-
Standby" time can be set within the range
of 1 - 99 minutes. Select the value using
ui and then press ENTER to enter the
setting value.
The unit does not go into standby
automatically.
Index
Appendix