Edge-Pro Tremolo Bridge - Ibanez Prestige Series User Manual

Edge-Pro tremolo bridge

■
Overview
3
1
6
1Knife edge
2Saddle lock bolt
3String holder block
4Tremolo arm socket
5String stopper bolt
6Fine tuning bolt
Attaching the tremolo arm
1.
The tremolo arm employs a snap-in/snap-out design.
Holding the corner of the tremolo arm, press it fi rmly into
the arm socket of the base plate until the Tefl on washers
are completely hidden.
2.
The tightness of the tremolo arm can be adjusted by
adding or removing Tefl on washers. Adding washers will
make the arm tighter, and removing all of the washers
will leave the arm free. Insert or remove the washers
diagonally through the slit.
Memo
• If the arm is no longer held fi rmly in place even after you've
added Tefl on washers, replace the old Tefl on washers with
new ones.
■
2
1
4
5
7Tremolo spring
8Spring lock
Rear
7
8
EN
47
➤➤