AUTO-TRIM peg
STRING REPLACEMENT
■
Removing a string
Loosen the string, and turn the lock knob located below the peg to
unlock the string.
Memo
•
Exercise care as the string may come out with great force
immediately after you release the lock.
■
Installing a string
1.
Turn the post so that the silver ball at the top is pointing
toward the bridge, and then pass the string through the
post.
2.
While pulling the string, turn the lock knob to lock the string
fi rmly.
3.
As you turn the knob, the surplus string will break off.
Continue tuning.
COLLET KNOB
Removing the collet knob
1.
Rotate the cap on top of the collet knob and
remove it.
2.
Use an Allen wrench (3 mm) to loosen the
chuck, and remove the knob.
42