The restart process should be displayed and you should be prompted back to the
"Maintenance" page after it is complete.
Reset the NVR to Factory Default
To reset the recorder back to its factory default, click "Default" but- ton and begin the
process.
The process should be displayed and you should be prompted back to the
"Maintenance" page after it is complete.
6.5.4 DO Status
This is where you can get the current status of the NVR digital output ports. You can
also change their status from this page.
6.5.5 Disk Status
"Disk Status" gives you more detailed information of the hard drive that is currently
installed in the NVR.