Sony SR-R1 Operation Manual page 76

Setting Item
METER TYPE
PEAK HOLD
BEEP (PHONE)
Sets the volume of the
beep tone.
INPUT DELAY
76 AUDIO Setup Menu
ALARM
WARN
HD SDI DELAY
ANALOG DELAY
Settings
Sets the display range of the audio level meters.
PEAK [Full Peak]: Displays 0 dBFS as the peak value.
REF [Full Ref]: Displays the reference level (+4 dBu) as
0 dB.
FINE [Fine]: Displays a scale with 0.25 dB steps and -20
dB at the center.
Sets whether or not to use the peak hold function.
ON [On]: Uses the function.
OFF [Off]: Does not use the function.
Sets whether or not to output alarm tones.
OFF [Off]: Does not output alarm tones.
HIGH [High]: Outputs high-level alarm tones.
LOW [Low]: Outputs low-level alarm tones.
Sets whether or not to output warning tones.
OFF [Off]: Does not output warning tones.
HIGH [High]: Outputs high-level warning tones.
LOW [Low]: Outputs low-level warning tones.
Sets whether to delay the HD SDI IN input audio.
[OFF]: Disables the delay setting.
ON: Enables the delay setting (set the length of the delay
in the DELAY setting).
Sets whether to delay the AUDIO IN input audio.
[OFF]: Disables the delay setting.
ON: Enables the delay setting (set the length of the delay
in the DELAY setting).