Sony SR-R1 Operation Manual page 70

Setting Item
REGENE SOURCE
RUN MODE
TCG SET
Time code generator
settings related to the
main time code
OTHERS
Other settings related
to the main time code
70 TC Setup Menu
DF/NDF
(Valid only when the frame
frequency of this system is
29.97 Hz.)
UBG SOURCE
12H/24H
TC OUT
RT REC
RT SET
Settings
Selects the time code to be synchronized (regenerated) by
the internal time code generator.
EXT L [External LTC]: Time code input to the TC IN
connector
SDI L [SDI LTC]: LTC time data of video signal input to
the HD SDI IN connectors A/B
SDI V [SDI VITC]: VITC of video signal input to the HD
SDI IN connectors A/B
Selects the run mode of the internal time code generator.
F RUN [Free Run]: Advances the time code while the
power is on.
R RUN [Rec Run]: Advances the time code only during
recording.
Sets the frame count mode.
DF [Drop Frm]: Drop frame mode
NDF [Non Drop Frm]: Non-drop frame mode
Note
This settings is valid only when TCG MODE is set to
"PRST."
Selects the source time code of user bits.
TCG [TCG Source]: Same source time code as that of the
time code generator
INT [Internal]: Time code generated by the time code
generator. Arbitrary user bits can be set regardless of
the setting of TCG (see page 37).
Selects the TIMER display mode.
12H [+/–12H]: 12-hour display mode
24H [24H]: 24-hour display mode
Note
When +/–12H display is selected, the tens digit of the
hours value is dropped for values less than 10.
Selects the time code to output from the TC OUT
connector.
AUTO [Auto]: During playback, the time code read by
the internal time code reader. During recording or when
in E-E mode, the time code generated by the time code
generator.
TCG [TCG]: The time code generated by the time code
generator.
THRU [Through]: Outputs the time code input to the TC
IN connector as is.
Sets whether or not to record the real time in user bits.
(For details, see page 38.)
OFF [Off]: Does not record.
VITC [VITC UB]: Records in the VITC user bit.
V+L [VITC UB+LTC UB]: Records in both the VITC and
LTC user bits.
LTC [LTC UB]: Records in the LTC user bit.
Sets the real time.