Sony SR-R1 Operation Manual page 14

5.
Status indication
Shows the control mode of the unit
(REMOTE/LOCAL), power mode (PB/EE),
and current time.
Top row Shows the REMOTE/LOCAL
setting of the SYSTEM Setup
menu (see page 80).
Center row Shows the POWER >MODE
setting of the SYSTEM Setup
menu (PB or EV) (see page 82).
When POWER >SAVE MODE
is selected, "SAVE" is shown
after the MODE indication.
Bottom row Shows the current time.
6.
Signal format indication
Shows the format of the signal being
recorded.
T Auto Timer Rec (see page 45)
M Manual Timer Rec (see page 44)
C Cache Rec (see page 46)
When SR Motion is being used, "S" is shown
before the system frequency.
7.
Encoding format indication (page 97)
Shows the encoding and bit rate settings used
for recording.
8.
SRMemory card remaining capacity
indication (page 23)
Shows the remaining space on the
SRMemory card calculated as remaining
time, using the current recording settings.
When the remaining time is less than 3
minutes, the indication flashes.
9.
Battery/External power supply voltage
indication (page 22)
Shows the battery or external power supply
voltage.
10.
Signal format indication (page 27)
When the FUNC button and HOME button
are pressed together, the system, playback,
and monitor output signal formats are shown
in that order from the top row.
When the unit is in one of the following
modes, an alphabetic character indicating the
mode appears before the number of lines.
T Auto Timer Rec (see page 45)
M Manual Timer Rec (see page 44)
C Cache Rec (see page 46)
14 Names of Parts
When SR Motion is being used, "S" is shown
before the system frequency. (see page 47)
During LUT conversion for monitor output,
"(LUT)" appears after the monitor output
display. (see page 66)
11.
SR Motion indication (page 47)
When the SYSTEM >FORMAT >SELECT
FPS menu option is set to "ON" or
"RECORDER", pressing both the FUNC and
HOME buttons together switches the bottom
row of the display to FPS or FRM indication.