Sony SR-R1 Operation Manual page 64

4
Press the SELECT/ENTER dial while
holding down the FUNC button.
Varying of the frame interval starts.
When the frame interval changes to that of
the end point, the values of the ramp start
point and the ramp end point are exchanged.
To stop varying of the frame interval
Press the SELECT/ENTER dial again while
holding down the FUNC button.
This also causes the values of the ramp start
point and the ramp end point to be
exchanged.
To vary the frame interval along an arbitrary
curve
Note
A file in which an arbitrary curve has been input needs to
be prepared in advance.
For details, see "To create a curve file" (page 64).
Operating mode: Auto (User)
1
Copy the curve file to a "Memory Stick"
and then insert the "Memory Stick"
into the slot.
For details on "Memory Stick"operation, see
"About "Memory Stick" Media" (page 99).
2
Select and confirm "Load Curve."
The curve file saved to the "Memory Stick"
appears.
3
Select and confirm the file.
L o a d U s r C u r v e
2.09/3.81 MB Free : 45% used
< MSSONY PRO SRMASTER R1> / / /
240
7,680
244
239
233
230
File Name SmoothC.csv
File Size 233 bytes
Date/Time 2008/11/27
Attribute
S T O P
SR-R1
A screen for checking the curve of the
selected file appears.
4
Press the SELECT/ENTER dial while
holding down the FUNC button.
The selected file is loaded.
64 SR Motion
[ *.CSV ]
/
10 Ramp2.csv
10 Ramp3.csv
SIN.CSV
SIN2048.CSV
SmoothA.csv
SmoothB.csv
SmoothC.csv
SmoothD.csv
15:56
07 :0 8: 4 1: 12
TCR
L o a d U s r C u r v e
2.09/3.81 MB Free : 45% used
< MSSONY PRO SRMASTER R1> / / /
64
65 points
1 to 64
1
Load SmoothC.csv?
Press[FUNC]+[ENTER] to Load.
CANCEL
S R - R1 S T O P
To change the file
Rotate the SELECT/ENTER dial to select
"CANCEL" and then press the dial.
5
Select "Duration" and then rotate the
ADJUST knob or the SELECT/ENTER
dial to set the time (seconds) from the
start to the end of the ramp.
6
Return to the HOME screen.
7
Press the SELECT/ENTER dial twice
while holding down the FUNC button.
A screen like the following appears to allow
you to check the settings.
SR Motion Recording
SYSTEM : 23.98PsF
SEL-PPS : 59.84P
MODE : VTR
SIGNAL : O FRM
MEMORY : ---
RAMP : USER
TCG
00 00
H
ENCODE
16.5V REMAIN
SR-SQ
- - -
10bit
8
Press the SELECT/ENTER dial while
holding down the FUNC button.
Varying of the frame interval along the
selected curve starts.
To create a curve file
Create a curve file on a computer.
1
Insert a "Memory Stick" in the slot of
the computer.
For details on "Memory Stick"operation, see
"About "Memory Stick" Media" (page 99).
[ *.CSV ]
/
OK
0 7 : 0 8 :4 1 : 1 2
TC R
1
FRM
FRM
6 0 0 . 0 0
FPS
FPS
( x 0.400 )
SR-R1
KEYINHI
RECINHI
08 16
M S F
LOCAL
1920x1080
EE
M 23PsF
4:4:4
15:07