Sony SR-R1 Operation Manual page 68

2
Create the following folder on the
"Memory Stick" and insert it into the
"Memory Stick" slot.
\MSSONY\PRO\SRMASTER\R1\LUT
3
Select LUT > LUT SAVE t move the
cursor to [OK], then hold down the
FUNC button while pressing the
SELECT/ENTER dial.
The LUT file is saved on the "Memory
Stick."
To delete all LUT files from all banks
Access the VIDEO Setup menu and 1 Select and
accept LUT t2 Select and accept LUT RESET
t3 Move the cursor to [OK], then hold down
the FUNC button while pressing the SELECT/
ENTER dial.
1 LUT
V i d e o S e t u p
PD(MON)
DC
MON SEL(x2)
VIDEO I/O
LUT
LEVEL CLIP
S T O P
SR - R1
Tip
LUT files on the "Memory Stick" cannot be deleted.
Format of LUT files that can be loaded
LUT files for loading into this unit must be text
files configured as shown below.
68 Monitor LUT Function
2LUT RESET
LUT(Monitor)
LUT MODE BANK3
LUT STATUS
LUT LOAD
LUT SAVE
LUT RESET
Reset LUT
Reset All
LUT Data ? Press
[FUNC]+[ENTER]
to Reset.
CANCEL OK
0 0: 00 :0 0: 0 0
TC G
3OK
Example:
# S-Log Viewing ITU-709
LUT: 1 1024
28
29
Header
29
29
30
Data
1022
1022
1022
1022
1022
1022
1022
Comment lines
Lines beginning with "#" are comment lines.
Header
LUT: 1 1024: Indicates that the file contains one
data set for 10-bit table, RGB common, and 0 to
1023.
LUT: 3 1024: Indicates that the file contains three
data sets for 10-bit table, RGB common, and 0
to 1023.
Data
Enter 1024 output values in text format, in
ascending order. Each value must be on its own
line.
28: First data item (output value for input value 0)
29: Second data item (output value for input value
1)
29: Third data item (output value for input value
2)
·
·
1022: 1023rd data item (output value for input
value 1022)
1022: 1024th data item (output value for input
value 1023)
Note
This unit supports data up to 12 bit. If a LUT file
containing 16-bit data is loaded, a simple bit shift is
performed and the most significant 12 bits are treated as
12-bit data.
Comment lines