Recording; Playback Preparations And Operations; Making Settings Related To Audio Monitor Signals; Adjusting Playback Audio Levels - Sony SR-R1 Operation Manual

3
Select and confirm the digit to change
t change and confirm the value.
4
When you have finished making the
settings, move the cursor to and confirm
"SET."

Recording

1
Check that the REC INHI indicator is
off and then insert an SRMemory card.
Before you insert the SRMemory card, check
that its write-protect switch is not set to
"WP."
For details, see "To insert the SRMemory card"
(page 23) and "Write-protecting the card"
(page 24).br
When the REC INHI indicator is lit
Record inhibit is set. Set SYSTEM Setup >
REC INHI to "OFF." (see page 80)
2
Press the PLAY button while holding
down the REC button.
Recording starts, and "REC LOCK" appears.
3
Press the STOP button to stop
recording.
To pause recording and record
sequentially
1
Press the PLAY button while holding
down the REC button.
Recording starts.
2
Press the PAUSE button when you want
to pause recording.
3
Press the PAUSE button when you want
to resume recording.
4
Repeat steps 2 and 3.
The recording is saved as one file.
Note
Sequential recording is not possible for a file for which
recording is finished.
38

Playback Preparations and Operations

Playback Preparations
and Operations
Making Settings Related to Audio
Monitor Signals
The AUDIO Setup menu allows you to make
various settings related to audio monitor signals
for playback. The setting procedures are the same
as for recording.
For details, see "Setting the Audio Signals"
(page 33) and "AUDIO Setup Menu" (page 74).
To adjust the level of audio output via the
EARPHONES jack
Rotate the LEVEL knob.

Adjusting Playback Audio Levels

The playback audio level can be set for each
channel in "PB LEVEL" of the AUDIO Setup
menu.
The setting procedure is the same as in steps 2 and
3 of "To set the recording levels" (page 35).
Note
The playback audio level cannot be adjusted during
recording.
To set the display range of the audio level meters
See "To set the display range of the audio level
meters" (page 34) for during recording.
Selecting the Time Data to
Display During Playback
Display the TC Setup menu and then select the
time data you want to display in "TIMER SEL."
TC: Displays the LTC or VITC read by the internal
time code reader.
Select which one is read in "TCR SEL" in the
TC Setup menu.
UBIT: Displays user bits inserted in the playback
time code.
TM1/TM2: The values counted in accordance with
the playback frames.