Bag Hook - Mercedes-Benz B-Class Operator's Manual

Hide thumbs Also See for B-Class:
Table of Contents

Advertisement

Depending on the angle of the backrest,
therefore, the right and left rear seats can
be pushed back varying distances until the
backrest is resting against the cargo
compartment cover.
If the backrest comes into contact with
surrounding parts of the cargo
compartment paneling, reduce the angle of
the backrest.
Adjusting the seat fore-and-aft position
!
When moving the rear seats back, make
sure there are no objects in the footwell or
behind the seats. The rear seats and/or the
objects could otherwise be damaged.
X
Lift the left or right release handle and slide
the corresponding seat forwards or
backwards.
X
Let go of the release handle again.
Make sure that you hear the seat engage in
position.
Securing cargo
Cargo tie-down rings
Observe the following notes on securing
loads:
Observe the loading guidelines
R
(
Y
page 236).
Secure the load using the cargo tie-down
R
rings.
Distribute the load on the cargo tie-down
R
rings evenly.
Do not use elastic straps or nets to secure
R
a load, as these are only intended as an
anti-slip protection for light loads.
Do not route tie-downs across sharp edges
R
or corners.
Pad sharp edges for protection.
R
There are four cargo tie-down rings in the
cargo compartment.
Cargo tie-down rings
:

Bag hook

G
WARNING
The bag hooks cannot restrain heavy objects
or items of luggage. Objects or items of
luggage could be flung around and thereby hit
vehicle occupants when braking or abruptly
changing directions. There is a risk of injury.
Only hang light objects on the bag hooks.
Never hang hard, sharp-edged or fragile
objects on the bag hooks.
!
The bag hook can bear a maximum load
of 6.6lbs (3kg) and should not be used to
secure a load.
There is one bag hook on either side of the
cargo compartment.
Stowage areas
Z
243

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents