Initializing the tire pressure warning system
The tire pressure warning system must be initialized in the fol-
lowing circumstances:
When rotating front and rear tires which have different tire infla-
tion pressures
When changing the tire size
When the tire inflation pressure is changed such as when
changing traveling speed
When the tire pressure warning system is initialized, the current
tire inflation pressure is set as the benchmark pressure.
How to initialize the tire pressure warning system
Park the vehicle in a safe place and turn the "ENGINE START
STEP
1
STOP" switch off (vehicles with a smart entry & start system)
or the engine switch to the "LOCK" position (vehicles without
a smart entry & start system).
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire infla-
STEP
2
tion pressure level. (P. 759)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
Turn the "ENGINE START STOP" switch to IGNITION ON
STEP
3
mode (vehicles with a smart entry & start system) or the
engine switch to the "ON" position (vehicles without a smart
entry & start system).
AVENSIS_OM_OM20B99E_(EE)
4-3. Do-it-yourself maintenance
549
4