Mercedes-Benz C-Class Operator's Manual page 318

Features
316
must therefore ensure that you observe the roof
carrier manufacturer's installation instructions.
Vehicles with a panorama roof with power
tilt/sliding panel: the panorama roof with
power tilt/sliding panel cannot be opened if a
roof carrier is installed. The panorama roof with
power tilt/sliding panel can still be raised to
allow ventilation of the vehicle interior.
If the panorama roof with power tilt/sliding
panel makes contact with a roof carrier
approved by Mercedes-Benz, the sunroof will
lower slightly but remain raised at the rear.
Attaching the roof carrier
Open covers : carefully in the direction of
X
the arrow.
Fold covers : upwards.
X
Only secure the roof carrier to the anchorage
X
points under covers :.
Observe the manufacturer's installation
X
instructions.
Features
Cup holder
Important safety notes
G
WARNING
If objects in the passenger compartment are
stowed incorrectly, they can slide or be
thrown around and hit vehicle occupants. In
addition, cupholders, open stowage spaces
and mobile phone brackets cannot always
retain all objects they contain. There is a risk
of injury, particularly in the event of sudden
braking or a sudden change in direction.
Always stow objects so that they cannot be
R
thrown around in such situations.
Always make sure that objects do not pro-
R
trude from stowage spaces, parcel nets or
stowage nets.
Close the lockable stowage spaces before
R
starting a journey.
Always stow and secure heavy, hard, poin-
R
ted, sharp-edged, fragile or bulky objects in
the trunk.
!
Only use the cup holders for containers of
the right size and which have lids. The drinks
could otherwise spill.
!
Do not expose drinks bottles in the cup
holder in the center console to continuous,
strong and direct sunlight. The passenger
compartment in the area of the center con-
sole can otherwise be damaged by the con-
centrated and reflected sunlight.
Observe the loading guidelines (
Cup holder in the front-compartment
center console
If you remove the cup holder insert, you can use
the resulting compartment for stowage.
To open: open the stowage compartment
X
( page 309).
Y
To remove: slide catch = forwards and pull
X
out cup holder ;.
To insert: insert cup holder ; and slide back
X
catch =.
To close: push cover : of the stowage com-
X
partment closed.
You can remove the cup holder's rubber mat for
cleaning. Clean with clear, lukewarm water only.
page 308).
Y