Mercedes-Benz C-Class Operator's Manual page 164

Automatic transmission
162
Temporary setting
To activate: shift the DIRECT SELECT lever to
X
position D.
Pull steering wheel paddle shifter : or ;.
X
Further information on activating manual gear-
shifting on PLUG-IN HYBRID vehicles
( page 229).
Y
Temporary setting will be active for a certain
amount of time. Under certain conditions the
minimum amount of time is extended, e.g. in the
case of lateral acceleration, during an overrun
phase or when driving on steep terrain.
To deactivate: pull steering wheel paddle
X
shifter ; and hold it in place.
or
Use the DIRECT SELECT lever to switch the
X
transmission position.
or
Use the DYNAMIC SELECT switch to change
X
the drive program.
Permanent setting (Mercedes-AMG
vehicles)
To activate: shift the DIRECT SELECT lever to
X
position D.
Press button :.
X
Indicator lamp ; lights up.
To deactivate: press button :.
X
or
If position D (automatic transmission) is
X
selected for the transmission in drive pro-
gram I: shift to drive program I with the
DYNAMIC SELECT switch.
Indicator lamp ; goes out.
Shifting gears
!
Mercedes-AMG vehicles: the automatic
transmission does not shift up automatically
even when the engine limiting speed for the
current gear is reached. When the engine lim-
iting speed is reached, the fuel supply is cut to
prevent the engine from overrevving. Always
make sure that the engine speed does not
reach the red area of the tachometer. There is
otherwise a risk of engine damage.
To shift up: pull steering wheel paddle
X
shifter ;.
The automatic transmission shifts up to the
next gear.
All vehicles (except Mercedes-AMG vehi-
cles): if the maximum engine speed on the
currently engaged gear is reached and you
continue to accelerate, the automatic trans-
mission automatically shifts up in order to
prevent engine damage.
To shift down: pull steering wheel paddle
X
shifter :.
The automatic transmission shifts down to
the next gear.
Automatic down shifting occurs when coast-
ing.