Mercedes-Benz C-Class Operator's Manual page 253

Using : or 9, select the
X
Running Lights function.
If the Daytime Running Lights
been switched on, the cone of light and the
W symbol are shown in white in the multi-
function display.
Press the a button to save the setting.
X
Further information on daytime running lamps
Daytime Running Lights
Instrument cluster submenu
Selecting the distance unit
The Display Unit Speed-/Odometer
allows you to choose whether certain displays
appear in kilometers or miles in the multifunc-
tion display.
Press the ò button on the steering wheel
X
to open the menu list.
Press the : or 9 button on the steering
X
wheel to select the Settings
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
Cluster submenu.
Press a to confirm.
X
Press : or 9 to select the
X
Unit Speed-/Odometer
The current setting km
Press the a button to save the setting.
X
The selected unit of measurement for distance
applies to:
Digital speedometer in the
R
Odometer and the trip odometer
R
Trip computer
R
Current consumption and the range
R
Range
R
Navigation instructions in the
R
Cruise Control
R
DISTRONIC PLUS with Steering Assist and
R
Stop&Go Pilot
ASSYST PLUS service interval display
R
Selecting permanent display
This function is only available on PLUG-IN
HYBRID vehicles.
Permanent Display
The
choose whether the multifunction display
Daytime
function has
( page 118).
Y
function
menu.
Instrument
Display
function.
or Miles appears.
Trip menu
Navi menu
function allows you to
Menus and submenus
always shows the outside temperature or the
speed.
The speed display is inverse to the speedome-
ter.
Press the ò button on the steering wheel
X
to open the menu list.
Press the : or 9 button on the steering
X
wheel to select the Settings
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
Cluster submenu.
Press a to confirm.
X
Press : or 9 to select the
X
Display function.
Press a to confirm.
X
The current setting Outside Temperature
or Speedometer
[inverseHardwareSpeedUnit]
To change the setting: press a again.
X
Switching the additional speedometer
on/off
This function is not available in PLUG-IN HYBRID
vehicles.
If the additional speedometer is switched on,
the speed is shown in the status bar in the mul-
tifunction display instead of the outside tem-
perature.
The speed display is inverse to the speedome-
ter.
Press the ò button on the steering wheel
X
to open the menu list.
Press : or 9 on the steering wheel to
X
select the Settings
Confirm by pressing a on the steering
X
wheel.
Press : or 9 to select the
X
ment Cluster submenu.
Press a to confirm.
X
Using : or 9, select the
X
Speedometer [km/h]
The current selection appears.
To activate/deactivate: press the a but-
X
ton again.
menu.
Instrument
Permanent
appears.
menu.
Instru‐
Additional
function.
Z
251