Mercedes-Benz C-Class Operator's Manual page 316

Stowage areas
314
Bag hook
:
EASY-PACK trunk box
Important safety notes
G
WARNING
When the load surface moves up, your hands
may become trapped on the frame of the
EASY-PACK trunk box. There is a risk of injury.
When the load surface moves up, make sure
that your hands are not within the sweep of
the load surface. If someone becomes trap-
ped, carefully push the center of the load sur-
face downward.
!
When the EASY-PACK trunk box is pulled
out, no objects may be placed on the frame of
the box, nor should the frame be pushed from
above. Otherwise, the box could be damaged.
!
Sharp-edged, pointed or fragile objects can
damage the EASY-PACK trunk box and then
be thrown out. There is a risk of injury.
Do not transport sharp-edged, pointed or
fragile objects in the EASY-PACK trunk box.
Always store and secure these or similar
objects in the trunk outside of the EASY-PACK
trunk box.
!
If you exceed the maximum permitted load
of the EASY-PACK trunk box, objects can be
thrown out of the EASY-PACK trunk box and
strike vehicle occupants. There is a risk of
injury, particularly in the event of sudden
braking or a sudden change in direction.
Always observe the maximum permitted load
of the EASY-PACK trunk box. Always store
and secure heavy objects in the trunk outside
of the EASY-PACK trunk box.
The maximum permitted load of the EASY-PACK
trunk box is 22 lbs (10 kg). With a load of above
approximately 11 lbs (5 kg), the bottom of the
box moves downward until it rests on the mat of
the trunk floor. Thus, overloading of the box is
avoided.
Adjusting the height to any position
Example
Pull the box out by handle : in the direction
X
of the arrow all the way to the stop.
Lowering the load surface: push the center
X
of load surface ; down by hand in the direc-
tion of the arrow until load surface ; has
reached the desired position and the box is
the desired size.
To raise the load surface: press switch =.
X
Load surface ; of the box moves up auto-
matically.
To stow the box: push the box in by han-
X
dle : all the way to the stop.
Removing and installing
Example
To install: insert retainer ; of box : into
X
slots =