Save Operation - Toyotomi LC-43 Instruction Manual

NOTE: The standard setting of the heater is 20°C. However, once the set temperature has been
changed the new setting will remain in effect unless changed.
These measurements may not represent the true room temperature.

SAVE OPERATION

The "SAVE" function allows you to limit the temperature. When this function
is activated, the heater will automatically switch off, when the room
temperature exceeds the set temperarure by 3°C. Subsequently, when the
room temperature has dropped again to the set temperature, the heater will
automatically switch on again. Activate the "SAVE" setting by pressing the
Save key. The Save indicalor will light up. Switch off the function by pressing
the Save key once again.
NOTE: Without the "SAVE" setting your heater will maintain the set temperature by approximation as
well, by adjusting its heating capacity. "SAVE" is an economy setting, which you can use when,
for instance, you are not present in the room or to keep it frost-free.
NOTE: Room temperature measurements are taken directly behind the heater.
7