AUTOMATIC CLEANING MODE
When the heater has been burning continuously for two hours at its highest setting, the burner will
automatically start an autoclean procedure. The display will show the autocleaningcode
back to
. The procedure takes 5 minutes, during which the heater will burn at its lowest setting,
while the burner autocleans. When the burner is clean again, the heater will automatically switch back
to the highest setting again.
TURNING OFF HEATER
While heater is burning, press power switch to "OFF"
position. This will extinguish heater and ON/OFF Lamp
on the indicator panel will go out.
The circulation fan motor will operate further, for
approximately 90 seconds to assist in cooling down
heater.
NEVER: Turn heater off by disconnecting the heater plug from the main elecrical supply.
DO NOT: Restart your heater for at least ten minutes.
AUTOMATIC DEACTIVATION
This heater is fitted with a safety system that ensures that it swiches off
automatically after 69 hours continuous operation. The following will then
appear in the display:. If desired, you can switch the heater on again by
pressing the button.
EMERGENCY MESSAGE
In the event that heater should extinguish itself, without any action or your part, you should look to the
digital indicator for any of the following messages.
MESSAGE
(Digital Indicator)
8
MESSAGE MEANING
running