Fueling - Toyotomi LC-43 Instruction Manual

FUELING

3. Turn the air vent knob on the top of the siphon clockwise toclose the vent. Start the flow of kerosene
(paraffin) by squeezing the bulb of the siphon vigorously six or seven times. Once flow begins, it is
no longer necessary to squeeze the bulb.
4. Check the removable tank fuel gauge while filling the tank.Stop filling by
loosening the switch button on top of the pump (turn anti-clockwise),
once the gauge indicates that the tank is full. Never overfill the tank,
especially not when the fuel is very cold (fuel expands when it heats up).
NOTE: Be careful to avoid overfilling the tank, especially with very cold
kerosene (paraffin). Overflow might occur due to expansion
when the fuel warms up.
5. Remove the siphon carefully, allowing excess kerosene(paraffin) to drain
from the tube back into the jerrycans. Replace fuel tank cap and tighten
it securely. Be sure to wipe away any spilled kerosene (paraffin) from tank
and other heater parts.
6. After making sure fuel tank cap is tightly fastened, invert tankand replace
into heater body.
4