www.gateway.com
9
Slide the new 3.5-inch component into the bay, then
push down on the release latch to move it to the Lock
position.
10
Reconnect the cables on the 3.5-inch component, using
the notes you took previously.
11
Replace the 5.25-inch component bay into the chassis.
12
Slide the 5.25-inch component into the bay and push up
on the release latch to move it to the Lock position.
13
Reconnect the cables on the 5.25-inch component, using
the notes you took previously.
14
Replace the front bezel and the hard drive bracket, then
replace the side panel.
45