Gateway E-4620 Reference Manual page 60

9
10
11
12
13
14
15
54
CHAPTER 4: Upgrading Your Computer
Remove the four screws securing the fan to the fan
shroud, then remove the old fan.
Secure the new fan to the fan shroud with the four
screws you removed in the previous step.
Connect the new fan cable to the system board, then
insert the new fan assembly into place.
Replace the 5.25-inch component bay into the chassis.
Slide the component back into the 5.25-inch bay, then
push up on the release latch to move it to the Lock
position.
Reconnect the cables using the notes you took
previously.
Replace the front bezel, replace the hard drive bracket,
then replace the side panel.