Basic Settings; Factory Settings - Kärcher BR 45/40 Service Manual

8

Basic settings

8.1 Factory settings

PROCESS SWITCH MENU, factory setting BR/BD 45-55/40 C/W Bp (Pack) - Series 02/10
Transport -
drive
Scrubbing DOSE
suction
Wet scrub-
bing
Scrubbing FACT
suction
Wet scrub-
bing
Polishing
Polish suc-
tion
Scrubbing Cleansp
suction eed
Wet scrub-
bing
Vacuuming
Polishing
Polish suc-
tion
Scrubbing VACU-
suction UM
Vacuuming
Polish suc-
tion
- -
1,0% 0,0:0,5:3,0% The DOSE can be switched off
Power Power Clean
Clean Whisper
Clean
Fine Clean
6 bars 1:1:6 s
Power Power
Whisper
No adjustment possibilities
planned.
via the menu item
DOSE_Edit=0 in the setup
menu.
If the bit is set, the dosing can
be varied according to the ad-
justment range.
In the setup menu by selecting
the appliance type: D FACT de-
activated The disc brush rotates
at 90% speed.
Via appliance type: R is availa-
ble to FACT as follows:
Power-Clean =100% speed
Whisper-Clean = 65% speed
Fine-Clean = 40% speed
Speed of the traction model, as
soon as the drive switch is ac-
tive and the deadman switch
has been actuated.
1 bar = 0.8 km/h
2 bars = 1.6 km/h ...
6 bars = 4.0 km/h
You can switch on and later ad-
just the access to the turbine
speed adjustment in the setup
menu via SUCTred.Edit:1.
Use 0 to force the operating
menu to switch off in the setup
menu; the turbine is then oper-
ated at nominal speed.
High = 100% speed
Whisper = 60% speed
Adjustable (X = yes)
This mod- 1,0%
el does
not sup-
port a
dosing
pump
connec-
tion
Power Clean only X for
without travel
drive
Only 100% nomi-
nal speed possi-
ble (=High)
English 5.906-269.0 Rev. 00 (03/11)
X
BR,
90%
fixed
for
BD
X
X
67