Table of Contents
Advertisement
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when:
◆
You purchase the air conditioner
The remote control does not work correctly
◆
Use two LR03 1.5V batteries. Do not use old batteries, or
IMPORTANT
different kinds of batteries together. Batteries may not be
usable after 12 months though they have not been used.
1
Push the battery cover on the rear of the remote control with your
thumb in the direction of the arrow.
2
Insert the two batteries, taking care to respect the polarities:
◆
+ on the battery with + on the remote control
◆
- on the battery with - on the remote control
3
Close the cover by sliding it back until it clicks into place.
When the following indication is displayed, replace the batteries
NOTE
with a new set of it.
Keeping the Remote Control
Keep the remote control in remote control case of the indoor unit
when it is not being used.
1
Open the control panel by pushing a part of it.
2
Put the remote control into the case.
Close the control panel by pushing a part of it in the direction
of the arrow until it clicks into place.
Remote
control
case
5
E-
Advertisement
Chapters
Table of Contents
