Starting To Cool - Samsung AP-3607BR Owner's Instructions & Installation Manual

Starting to Cool

You must select the COOL mode if you wish to adjust the:
◆ Cooling temperature
◆ Fan speed when cooling
1 If necessary, press the ON/OFF
Result: ◆ The OPER. light on the indoor unit switches on.
◆ The operation mode previously set is displayed.
◆ The indoor unit beeps twice.
◆ The air conditioner starts up in the current mode.
IMPORTANT The air conditioner is fitted with a protection feature which
prevents the unit from being damaged when it is started
immediately after being:
◆ Swithced on
◆ Stopped
After a rest period of three minutes, it will start up normally.
Press MODE under the remote control flap one or more times until the
2
COOL indicator is displayed.
3 Select the temperature by pressing the TEMP.SET ▲ or ▼ buttons one
or more times until the required temperature is displayed.
Possible temperatures are between 18
Each time you change the temperature by 1˚C,
NOTE
the indoor unit beeps.
The air conditioner will only start cooling if the room temperature
is higher than the selected temperature.
The fan will, however, operate. During cooling,
the light switches on.
4
Select the fan speed by pressing the FAN SPEED button one or more
times until the required setting is displayed:
Low
Medium
High
Natural
Auto
NOTE
Each time you change the fan setting, the indoor unit beeps.
5
Control the air flow direction when necessary.
Refer to page 15.
button.
( )
and 30
˚C(65˚F) ˚C(86˚F)
inclusive.
11
E-