Table of Contents
Advertisement
M
O
ETHOD
I
NSTALLATION
Be sure to read the installation manual carefully to ensure
sufficient realization of the excellent performance of the unit.
Be sure to drill a hole in the wall necessary for installation
before attempting to install the unit.
After completion of installation, be sure to perform a test
operation of the unit to check for any problem, and then
deliver the unit to the customer if the test results are acceptable.
After completion of test operation, hand over the owner's manual,
installation manual, and warranty card to the customer.
※ As the installation work requires special skill, be sure to request a
qualified dealer to take care of the installation of your unit; the user
should not attempt to install his/her unit by himself/herself.
※ Do not attach any electric heating device or electric heater to the unit.
Do not attempt to disassemble or modify the unit by yourself.
(It may cause machine trouble, electric shock or fire.)
Absolute Checkpoints
1. Drain check
2. Drilling a hole in the wall
→ Refer to page 31 for detailed procedures.←
24
E-
F
Less than
Ø60mm
150mm
37
(2 inch)
64
(6inch)
Table of Contents
Accessory Parts List
Selection of Installation Place
Memo
25
25
26
26
27
28
28
29
30
31
31
31
32
33
34
36
Advertisement
Chapters
Table of Contents
