Assigning A Pedal Initial State; Assigning The Pedal Type; Chapter 4. Multi Sound Editing; Channel Mixer - Kurzweil SP7 Grand User Manual

Multi Sound Editing
Chapter 4.
3-4-7 Assigning the Pedal Type - ⓔ
Use the Type parameter to set an SW pedal behavior to Momentary or Toggle.
When Type is set to Momentary, the given SW pedal sends its "On Value" when pressed, and its "Off Value" when
released.
When Type is set to Toggle, the given SW pedal alternates between sending its "On Value" or "Off Value" each time
it is pressed. No value is sent when the pedal is released.

Chapter 4. Multi Sound Editing

In the SP7 Grand, all Sounds are actually comprised of up to 16 individual zones (multitimbral). Each zone can have
its own sound preset, key range, mix settings and unique controller assignments. By assigning a zone controller
(button, pedal or knob) to the "Zone Activate" Destination, you can conveniently mute and unmute different zones
to create multi-layered/split combination sounds on the fly.
Multi sound editing is accessed from the Channel Mixer, Key Range, and Zone Edit tabs of the Sound EDIT page.
Adjust all parameter dials by touch, alpha wheel (once selected), Increase+/Decrease- buttons, or tap the value
field to open a numeric keypad for more precise data entry.
28
Chapter 4
3-4-6 Assigning a Pedal Initial State - ⓓ
The Initial State establishes a given pedal's default
starting point when a sound is first selected. "None"
sets no initial state and, as such, will adopt the state (on
or off) of that same pedal from the previously selected
sound. A setting of On or Off specifically sets the pedal
to the corresponding On or Off value when the sound is
first selected.

4-1 Channel Mixer

The Channel Mixer is used to adjust the mix settings of
the 16 multi zones. For easier viewing and adjustment,
the mixer is divided on screen into two banks of 8
channels, which you can toggle between by tapping the
"9-16" (1-8) button in the upper right.
Each of the 16 mixer channel strips consists of a zone
on/off status icon, solo, zone activate, pan and volume
fader.
Enable a new channel (zone) by clicking the (+) ACTI-
VATE icon. To disable a channel, tap the corresponding
numbered zone on/off status icon (at the top of the
channel strip).
Control the overall mix level using the Output volume
fader on the right.