Display And Leds; Switching On The Display; Calling Up Messages Of The Start Phase - SMA Sunny Boy 3000TL-US Installation Manual

SMA America, LLC

9 Display and LEDs

9.1 Switching On the Display

By tapping on the enclosure lid once you can operate the display as follows:
• Switch on the display
• Switch through the text line display
• Switch between the power curve of the last 16 feed-in hours and the energy yields of the last
16 days

9.2 Calling Up Messages of the Start Phase

If you double tap on the enclosure lid, the display messages of the start phase are repeated.
The following device properties will be displayed in succession:
• Device type
• Firmware version
• Serial number or device name of the inverter
®
• For Zigbee communication: version information of the assembly and status of the Zigbee
communication
The following status messages are possible.
– SERVER COM: data transmission active
– NET SEARCH: searching for ZigBee
– NET JOINED: network found, but no reply from the gateway
– GATEWAY COM: gateway found, but no connection to the server
– COM INIT: no data transmission possible
• For Speedwire communication: version information of the assembly
• Country data set used
• Display language
Installation Manual
®
network
9 Display and LEDs
SB3-5TLUS22-IA-en-12
®
53