SMA Sunny Boy 3000TL-US Installation Manual page 29

SMA America, LLC
2. Align the wall mounting bracket horizontally at the mounting location.
3.
Danger to life due to electric shock or explosion if you drill into supply lines
There may be gas pipes or electric cables behind the mounting points which could be damaged
when drilling the holes for the wall mounting bracket.
• Make sure that there are no supply lines behind the mounting points.
4. Mark the position of the drill holes using the wall mounting bracket and screw the wall mounting
bracket onto the wall using the screws and washers.
• For mounting on a stone wall, use one hole on
the right-hand and left-hand side and the lower
hole in the wall mounting bracket.
• For mounting on a stud or post in a drywall
construction, use the two holes at the center.
Installation Manual
5 Mounting
SB3-5TLUS22-IA-en-12 29