Commissioning; Making Settings Via The Rotary Switches; Overview Of The Rotary Switches - SMA Sunny Boy 3000TL-US Installation Manual

SMA America, LLC

7 Commissioning

7.1 Making Settings via the Rotary Switches

7.1.1 Overview of the Rotary Switches

The inverter can be configured for different countries and for use in backup and off-grid systems via
two rotary switches. The rotary switches can also be used to change the display language.
By default, the inverter is set to a specific country data set. You can see which country data set was
set as default at the factory in the supplementary sheet provided with the factory settings. If the default
country data set of the inverter does not apply to your country, you must change the country data set
and the display language. You can also change the display language independent of the country
data set (see Section 7.1.3).
If you use a communication product, you can also change the country data set after commissioning
using that communication product (see Section 8.1).
Figure 13: Configuration area inside the inverter
Item Description
A Rotary switch A for setting the country standard
B Rotary switch B for setting the language
C Rotary switch C for setting the Zigbee
D Jumper slot for setting the language to English
Installation Manual
®
ID
SB3-5TLUS22-IA-en-12
7 Commissioning
47