SMA America, LLC
9 Display and LEDs
9.1 Switching On the Display
By tapping on the enclosure lid once you can operate the display as follows:
• Switch on the display
• Switch through the text line display
• Switch between the power curve of the last 16 feed-in hours and the energy yields of the last
16 days
9.2 Calling Up Messages of the Start Phase
If you double tap on the enclosure lid, the display messages of the start phase are repeated.
The following device properties will be displayed in succession:
• Device type
• Firmware version
• Serial number or device name of the inverter
• For Speedwire communication: version information of the assembly
• Country data set used
• Display language
Installation Manual
9 Display and LEDs
SB3-5TLUS22-IA-en-16
53