Commissioning; Procedure For Commissioning In Systems Without System Manager; Procedure For Commissioning In Systems With System Manager - SMA SUNNY TRIPOWER CORE2 Operating Manual

9 Commissioning

9 Commissioning
9.1 Procedure for commissioning in systems without
System Manager
This section describes the procedure of commissioning an inverter that is configured individually
and used in systems without System Manager (e.g. SMA Data Manager or an inverter that is
configured as System Manager).
It provides an overview of the steps, which must be performed in the prescribed sequence.
Procedure
1.
2.
3.
4.
5.
9.2 Procedure for commissioning in systems with
System Manager
This section describes the procedure of commissioning an inverter that is used in systems with
System Manager (e.g. SMA Data Manager or an inverter that is configured as System Manager).
In this case, the inverter is controlled or regulated by the System Manager.
It provides an overview of the steps, which must be performed in the prescribed sequence.
Procedure
1.
2.
3.
52 STP110-60-BE-en-16
Commission the inverter.
Establish a connection to the user interface
of the inverter. There are various connec-
tion options to choose from for this:
• Direct connection via Ethernet
• Connection via Ethernet in the local
network
Log into the user interface.
Set country data set.
Make further inverter settings as needed.
Commission the inverter.
Commission the System Manager.
Register the inverter as an SMA Speedwire
device in the System Manager and make
the initial configuration of the inverter via
the System Manager. The configuration is
transferred to the inverter and the settings
of the inverter are overwritten.
SMA Solar Technology AG
See
Section 9.3, page 53
Section 10.1, page 55
Section 10.2, page 56
Section 10.9, page 62
Section 10, page 55
See
Section 9.3, page 53
Manual of the System Manager
Commissioning Assistant of the
System Manager
Operating manual