Installing Colorado Backup For Windows - HP Colorado 5GB Installation Manual

Installing Colorado Backup for Windows

NOTE: Do not install Colorado Backup for Windows 3.1 for use in Windows
95. This application does not support Windows 95 conventions such as long
filenames and backups of the registry. See "Installing Colorado Backup for
Windows 95" on page 21.
1. Connect the tape drive to your parallel port as described in "Connecting
the Hardware" on page 2. The drive must be attached to install and
configure the software.
2. Insert the software installation CD into your CD-ROM drive. If your
computer does not have a CD-ROM, see page 33.
3. In Windows, open the Program Manager window, if it is not already
open.
4. From the Windows' Program Manager, Click on the File menu and select
Run. The Run box appears.
5. In the Command Line box, type
your CD-ROM's drive letter).
The following screen appears:
6. Select the desired language or leave the default and click Next.
Installing the Software
D:\SETUP
and press (where D: is
ENTER
15