Connecting And Installing The Hp D2D Backup System; Installing The Rail Kit; Overview; Kit Contents - HP StorageWorks D2D100 - Backup System User Manual

2 Connecting and installing the HP
D2D Backup System
In this chapter:
• "Installing the rail
• "Connecting the
• "Supported network
• "Powering on the HP
• "Software installation, discovery and
• "Web browser

Installing the rail kit

Overview

This section contains instructions for installing HP rack rails into square and round hole racks for the
HP D2D (1U) and HP D2D (2U) Backup Systems.

Kit contents

• Two rack rails (left and right)
• Mounting hardware for square and round hole racks
• Two tie wraps
NOTE:
If mounting the HP D2D into threaded hole or telco racks, please see
purchase mounting hardware.

Important safety information

See also the Safety Booklet on the HP StorageWorks D2D Backup System CD-ROM.
CAUTION:
Electrostatic discharge (ESD) can damage electronic components. Be sure you are properly grounded
(earthed) before beginning any installation procedure.

Installation guidelines

This installation is to be performed by qualified individuals who have knowledge of the procedures,
precautions, and hazards associated with equipment containing hazardous electrical circuits.
kit" on page 27
hardware" on page 32
configurations" on page 32
D2D" on page 34
configuration" on page 34
settings" on page 37
http://www.racksolutions.com
D2D Backup System HP D2D2503
to
27