Table of Contents
Advertisement
Colorado Backup for Windows 95 Requirements
Installing Colorado Backup for Windows 95 requires:
Windows 95
8 MB of RAM
20 MB of available hard drive space (15 MB for the software and an
additional 5 MB of space for operations overhead). To check available
hard drive space, double-click on My computer; click on the icon
representing the hard drive on which the backup software will be
installed; open the File menu and select Properties. Available hard
drive space must be at least 20 MB.
Windows NT 4.0
You can use the Windows NT Backup applet with this tape drive.
LAN Installation
When using Colorado Backup on a LAN, the tape drive hardware and
software must be installed in a workstation. Do not install them on the
network server. For other LAN installation options, call the Cheyenne
Customer Support phone number listed on page 45.
NOTE: Do not use Colorado Backup for Windows 95 to backup Novell servers.
Colorado Backup for DOS can backup Novell 2.x and 3.x servers or Colorado
Backup for Windows (3.1 or 3.11) can backup Novell 3.x servers.
NOTE: Colorado Backup for Windows 95 can back up computers over your
Windows 95 and Windows for Workgroups networks. However, Colorado
Backup for Windows 95 will only back up the Windows 95 registry of the
computer to which your tape drive is attached. The Windows 95 registry of a
remote computer will not be backed up.
Technical Information
35
Hide quick links:
Advertisement
Table of Contents
