Colorado Backup For Dos Requirements; Colorado Backup For Windows Requirements - HP Colorado 5GB Installation Manual

34

Colorado Backup for DOS Requirements

Colorado Backup for Windows Requirements

Installation Guide
Installing Colorado Backup for DOS requires:
DOS 5.0 or higher. To identify your version, type
prompt and press
A minimum of 512 KB of conventional memory. Performance is
likely to improve with more available memory. To check free memory,

type at the DOS prompt and press
"Largest executable program size" should be at least 524,288.
6 MB of available hard drive space (1 MB for the software and an
additional 5 MB of space for operations overhead). To check available
hard drive space, type
"Bytes available on hard drive" should be at least 6 MB.
Installing Colorado Backup for Windows requires:
Windows version 3.1 or 3.11 running in 386 Enhanced mode. To
verify your version and mode, from the Program Manager, open the
Help menu, then select About Program Manager. The software
version is listed and "386 Enhanced Mode" must appear in the box.
4 MB of RAM in Windows 3.1
8 MB of RAM in Windows for Workgroups
10 MB of available hard drive space (5 MB for the software and an
additional 5 MB of space for operations overhead). To check available
hard drive space, double-click on the File Manager icon in the Main
program group. Then click on the icon for the hard drive where
Colorado Backup is to be installed (C: is the default). The amount of
free hard drive space appears at the bottom of the window. It must be
at least 10,000 KB.
In addition, the following is recommended but not required:
Your computer might be running either the SHARE.EXE or
VSHARE.386 (but not both). If either is running, you will find
SHARE.EXE in either your CONFIG.SYS or AUTOEXEC.BAT file, and
VSHARE.386 will be in your SYSTEM.INI file.
See your Microsoft Windows User's Guide for more information.
.
ENTER


at the DOS prompt and press

at the DOS
. The value listed after
ENTER
.
ENTER