Using The Tape Drive On Other Computers - HP Colorado 5GB Installation Manual

Using the Tape Drive on Other Computers

The software installation CD that came with your tape drive allows you
to install Colorado Backup for DOS, Windows 3.x, and Windows 95. You
can disconnect the tape drive and move it to another computer as long as
the other computer meets the installation requirements described in the
section "Minimum System Requirements" on page 33.
The first time you connect the tape drive to another computer, you must
also install any necessary software.
To move the tape drive to another computer:
1. Turn OFF your computer.
2. Unplug the tape drive from the outlet or power strip. (There is no power
switch on the tape drive.)
3. Disconnect the data cable from the back of your computer.
Connecting the Hardware
7