Operation; Control Description - Furuno FCV-628 Operator's Manual

1.

OPERATION

1.1

Control Description

No. Control
1 MENU/ESC

2
(TrackPad)
3 ENTER
4 RANGE
5 MARK*
6 FUNC
7 GAIN
8 MODE
9
/BRILL
* Inoperative when equipped with "Tankenmaru" system.
How to remove the cover
Pull down on the catch at the bottom of the cover
and pull the cover toward you.
• Opens menu. Go back one page in multi-page menu.
• Escapes from current operation.
• Selects items on the menu.
• Changes settings.
•  or  moves the VRM (Variable Range Marker).
Saves settings.
Opens range selection window.
Registers waypoint.
Short press: Opens window programmed.
Long press: Opens function key programming window.
Push: Opens [Auto Gain] setting window.
Rotate: Manually adjusts gain.
Selects display mode.
Short press: Turns on power; opens the [Brill] adjustment window.
Long press: Turns off power.
1
2
3
4
5
6
7
8
9
Function
If you remove the display unit (for desktop
installation) after an outing...
Cover the connectors with the supplied caps to
keep dust out of terminals.
• Transducer cable: Use the MJ cable cap
(large) supplied with the transducer cable.
• 12-24 VDC, NMEA, XDR: Use "port" and
"XDR" caps.
• Power cable assy.: Use supplied cap.
1