Operation; Control Description - Furuno FCV-600 Operator's Manual

1.

OPERATION

1.1

Control Description

Front side
No. Control
1 MODE Opens [MODE] selection window.
2 MENU/ • Opens/closes the menu.
ESC • Escapes from current operation and go back one page in menu.
3 KNOB Rotate*:
• Selects items on the menu.
• Changes settings.
• Adjusts gain (Requires [Auto Gain] to be set as [Off].)
*: Clockwise: Increases numerical value. Moves the cursor down (or right).
Counter-clockwise: Decreases numerical value. Moves the cursor up (or left).
Press:
• Confirms the selected menu/operation.
• Applies the gain adjustment. (Selected by rotating; requires [Auto Gain] to be
4 RANGE Opens range selection window.
5 GAIN Opens [Auto Gain] setting window.
6  • : Moves marker cursor.
(TrackPad) • : Moves the VRM (Variable Range Marker). Disabled for nav display.
• : Switches to scroll back mode. Disabled for nav display.
7 FUNC Short press: Opens programmed window.
Long press: Opens setting window for function key.
8 MARK Registers waypoint.
9 Buzzer Activates/deactivates key beeps and alarm sounds.
(FCV-800
only)
10 Short press: Turns on power; opens the [Brilliance/Panel Dimmer] adjustment
/BRILL
window.
Long press: Turns off power.
11 USB port Open the cover and insert USB flash memory.
cover Note: Make sure to close the cover when not used.
MENU/
MODE
ESC
RANGE GAIN
FUNC MARK
BRILL
set as [Off].)
Back side
Function
PWR/KP
NMEA0183
XDR1
XDR2
NMEA2000
1-1
1