Furuno FCV-628 Operator's Manual page 24

Bottom
1) Set [Bottom] to [On], then press the
ENTER key.
2) Select [From], then
press the ENTER key.
3) Set the starting depth,
then press the EN-
TER key.
4) Select [Span], then
press the ENTER key.
5) Set the width of the
alarm, then press the
ENTER key.
10. Press the MENU/ESC
key to show the [Fish School] setting win-
dow.
11. Select [Alarm], then press the ENTER
key.
12. Select [On], then press the ENTER key.
Note 1: To disable an alarm, select [Off] at
step 12 in the above procedure.
Note 2: The default alarm settings can be re-
stored. Open the [Fish Alarm] setting window,
select [Reset?], press the ENTER key, select
[Yes], then press the ENTER key.
Navigation alarms
Do the following to set the navigation alarms
(speed alarm and arrival alarm).
1. Open the menu, select [Alarm], then
press the ENTER key.
2. Select [Speed] or [Arrival], then press the
ENTER key.
*
* Settable when alarm is activated.
3. Do one of the following two procedures
according to the item selected at step 2.
Speed
1) Select [Speed], then press the EN-
TER key.
2) Select [Inside] or [Outside] as applica-
ble, then press the ENTER key.
3) Select [From Speed],
then press the ENTER
key.
4) Enter the starting
speed, then press the ENTER key.
5) Select [Speed Span],
then press the EN-
TER key.
6) Enter the width of the
alarm, then press the ENTER key.
Arrival
1) Select [Arrival], then press the EN-
TER key.
2) Select [Inside] or [Outside] as applica-
ble, then press the ENTER key.
3) Select [Radius], then
press the ENTER key.
4) Enter the alarm radius,
then press the ENTER
key.
To disable the alarm, select [Off] at 2) of
step 3.
*
17
1. OPERATION