Metrologic MS9524 VoyagerPDF Series Installation And User Manual page 19

A
SSEMBLING THE
Wall Mount, Option 1:
For Kit #46-46433 or
Kit #46-46508
Step 1:
Drill two #39 pilot holes 3.00" apart.
Step 2:
Attach the Wall Mount Hanger to the wall
with the two #8 wood screws provided.
Wall Mount, Option 2:
Kit #46-46508
Step 1:
Attach the Wall Mount Base to the Wall
Mount Hanger with the two 4.8 x 13 mm
self-tapping screws.
Step 2:
Remove one side of the protective
backing from the double-sided adhesive
tape.
Step 3:
Attach the tape to the back of the Wall
Mount Hanger as shown.
Step 4:
Remove the protective backing from the
double-sided adhesive tape and apply
hook to the wall.
S (C
TAND ONT
.)
Figure 28.
Figure 29.
Figure 30.
15