Metrologic MS9524 VoyagerPDF Series Installation And User Manual page 17

A
SSEMBLING THE
There are 2 options for assembling the stand. The first option allows the stand to
be self-supporting and moved freely or placed anywhere on the countertop. The
second option is used if the stand will be bolted/hard-mounted to the countertop.
Stand Option 1: Self-supported
Step 1
Slide the apron (
over the stand (
MLPN
Step 2
Position the stand so it sits under
the tab on the apron. Then secure
the apron to the stand using the
M3 x 6 mm screws
( 18-18670) and the #5
MLPN
washers ( 18-18671) provided.
MLPN
Stand Option 2:
2.00 in
2.00 in
Figure 21.
#8 Wood
Screw
Figure 22.
Continued on next page.
S
TANDS
For use with kit #46-46128
50-50440)
MLPN
36-00454).
Hard-mounted to countertop
For use with kit #46-46351
Base
Apron
Apron
Tab
M3 x 6 mm
Screw
Step 1
Drill four #39 holes in the countertop.
Step 2
Secure the base (
to the countertop with the four
#8 wood screws (
Stand
36-36080)
MLPN
18-18057) provided.
MLPN
Figure 19.
Stand
#5 Washer
Figure 20.
13