Specifications; Specifications - Toro Greensmaster 3150 Service Manual

Specifications

MOUNTING: The groomer is mounted to the DPA cut-
ting unit side plates. The drive assembly for the groom-
ing reel is located on the opposite side of the cutting unit
from the hydraulic cutting reel motor.
GROOMING REEL CONSTRUCTION: 2.375 inch (6
cm) diameter, 41 steel blades with 1/2 inch blade spac-
ing. Blade spacing can be adjusted to 1/4 inch or 3/4 inch
by altering the number and position of blade spacers on
the groomer. Groomer brush can be installed in place of
grooming reel.
Groomer
GROOMER HEIGHT SETTING: From 0.030 to 0.620
inch (0.8 to 15.7 mm) at mowing HOC range of 0.060 to
0.750 inch (1.5 to 19.1 mm).
WIDTH- -OF- -GROOMER: 19.380 inches (49.2 cm).
HEIGHT ADJUSTMENT KNOB: Allows a 0.003 inch
(0.08 mm) increment of height adjustment for each click
of the adjuster.
UP- -DOWN FEATURE: Allows grooming reel to be
raised above the height/depth adjustment for no groom-
ing reel action while cutting.
Page 8 - - 2 Greensmaster 3150