Specifications - Sony MHC-V808 Operating Instructions Manual

Specifications

Amplifier section
Continuous RMS power output
Peak music power output 1500 watts
Inputs
AUDIO IN (phono jacks): voltage 250 mV,
MIX MIC (phone jack):
Outputs
AUDIO OUT (phono jacks):
VIDEO (phono jacks):
S-VIDEO (4-pin/mini-DIN jacks):
PHONES (stereo phone jack):
SPEAKER:
SURROUND SPEAKER: accepts impedance of 16
SUPER WOOFER:
64
90 + 90 watts
(8 ohms at 1 kHz,
10% THD)
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
voltage 250 mV
impedance 1 kilohms
max. output level
1Vp-p, unbalanced,
Sync negative,
load impedance 75 ohms
Y: 1Vp-p, unbalanced,
Sync negative,
C: 0.286Vp-p,
load impedance 75 ohms
accepts headphones of 8
ohms or more
accepts impedance of 8 to
16 ohms
ohms
voltage 1V, impeance 1
kilo ohm
Video CD / CD player section
System
Laser
Laser output
Wavelength
Audio
Frequency response:
Signal-to-noise ratio:
Dynamic range:
Video
Color system format:
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
Output Level
Tape player section
Recording system
Frequency response
(DOLBY NR OFF)
Wow and flutter
Compact disc digital
audio and video system
Semiconductor laser
(λ=780nm)
Emission duration:
continuous
Max. 44.6 µ W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
780 – 790 nm
2 Hz – 20 kHz (±0.5 dB)
More than 90 dB
More than 90 dB
NTSC, PAL
600 nm
–18 dBm
4-track 2-channel stereo
60 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
60 – 14,000 Hz (±3 dB),
using Sony TYPE II
cassette
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)