Sony MHC-V808 Operating Instructions Manual page 6

Step 1: Hooking up the system
(continued)
6
Connect the power cord to a wall
outlet.
Demo mode appears in the display.
If the plug on this unit does not fit
your wall outlet, detach the supplied
adapter from the plug (except for
Malaysia and China).
7
Deactivate the demo mode by
pressing DISPLAY/DEMO when
the system power is turned off.
Inserting two size AA (R6)
batteries into the remote
Using the remote
You can use the shaded buttons shown below
to operate Sony TV.
TV/VIDEO
To
Turn the TV on or
off
Switch the TV's
video input
Change the TV
channels
Adjusts the volume TV VOL +/–.
of the TV speaker(s)
6
TV POWER
TV VOL +/–
TV CH +/–
Press on the remote
TV POWER.
TV/VIDEO.
TV CH +/–.
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the front speakers to stabilize the
speakers and prevent them from slipping.
When carrying this system
Do the following to protect the CD
mechanism.
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 Hold down PLAY MODE and press
POWER so "LOCK" appears in the display.