Playing Cds Without Interruption - Sony MHC-V808 Operating Instructions Manual

To
Check the program
repeatedly. After the last
track, "CHECK END"
Clear a track from CLEAR on the remote in
the end stop mode.
Clear a specific CHECK on the remote
track repeatedly until the
number of the track to be
erased lights up, then press
CLEAR.
Add a track to the 1 Select the disc with the
program
2 Select the track by
3 Press ENTER/NEXT.
p once in stop mode or
Clear the entire
program twice while playing.
Tips
• To program tracks using the remote, press the
numerical buttons (for the tracks you want to
play) in the order you want in step 4, then skip
step 5.
• To program tracks numbered over 10, press >10,
then press the numerical buttons. Press 10/0 to
enter 0. See the example below.
– To enter the track number 30; press >10 m 3 m
10/0.
• The program you made remains in the CD player
even after it has been played back. Press ·∏ to
play the same program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track numbered over
20
– the total playing time has exceeded 100 minutes.
Press
CHECK on the remote
appears.
DISC 1 – 3 buttons.
turning the jog dial.
Playing CDs without
interruption
–– CD Non-Stop Play/CD Applause
Mix
You can play CDs without pausing between
tracks or you can mix in the sound of
applause between tracks.
You cannot use this function with VIDEO
CDs.
2
POWER
1
Press FUNCTION repeatedly until
"CD" appears in the display.
2
Press CD NON-STOP repeatedlly to
select the mode you want.
To
Play without
pausing between
tracks
Mix applause
between tracks
3
Press ·∏.
To cancel Non-Stop Play
Press CD NON-STOP repeatedly until
"NON-STOP OFF" appears in the display.
3 1
Select
NON-STOP PLAY
APPLAUSE MIX
41