Recording A Cd By Specifying Track Order - Sony MHC-V808 Operating Instructions Manual

Recording a CD by
specifying track order
— Program Edit
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
This function cannot be used during menu
playback of VIDEO CDs with PBC functions
(Ver 2.0).
11
POWER
6 5 10 12
FUNCTION
EDIT
3 4 1 2
π
DOLBY
NR
8
CHECK
1
Place a CD and insert a blank tape
into deck B.
2
Press FUNCTION repeatedly until
"CD" appears in the display.
3
Press PLAY MODE repeatedly until
"PROGRAM" appears in the
display.
4
Press one of the DISC 1 – 3 buttons
to select a CD.
5
Turn the jog dial until the desired
track appears in the display.
Disc number
1DISC PROGRAM
6
Press ENTER/NEXT.
The track is programmed. "STEP" and
the programmed playing order appear,
followed by the total playing time.
1
1DISC PROGRAM
7
To program additional tracks to be
recorded on side A, repeat steps 4 to
6.
Skip step 4 to select tracks from the same
disc.
8
Press ∏ on the remote to insert a
pause at the end of side A.
"P" appears in the display and the total
playing time resets to "0.00" in the
display.
Total playing time
(including selected track)
Track number
Total playing time
Previously selected track
VOLUME
VOLUME
continued
43