Sony MHC-V808 Operating Instructions Manual page 15

To Do this
Press p (or π on the remote).
Stop playback
Press ·∏ (or ∏ on the
Pause
remote). Press again to resume
playback.
Select a track During playback or pause,
turn the jog dial clockwise (to
go forward) or
counterclockwise (to go back)
and release it when you reach
the desired track. Or press
± (to go forward) or ≠
(to go back) on the remote.
Press and hold down ) or
Find a point in
0 (or º/‚ on the
a track
remote) during playback and
release it at the desired point.
Select a CD Press a DISC 1 – 3 button or
in stop mode DISC SKIP EX-CHANGE (or
D. SKIP on the remote).
Play only the Press 1/ALL DISCS
CD you have repeatedly until "1 DISC"
selected appears.
Play all CDs Press 1/ALL DISCS repeatedly
until "ALL DISCS" appears.
Remove the CD Press § OPEN/CLOSE.
Exchange other Press DISC SKIP
CDs while EX-CHANGE (or D. SKIP on
playing the remote).
Adjust the Turn VOLUME (or press
volume VOL +/– on the remote).
Tips
• Pressing ·∏ when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
·∏ or the DISC 1 – 3 buttons (Automatic Source
Selection).
• If there is no CD in the player, "CD NO DISC"
appears in the display.
• When a disc tray is selected or the CD placed on
that tray is playing, the DISC 1 – 3 button for the
respective tray lights green.
15