Advertisement
QS.420_Mini Plus.qxd
Getting Started
How to Make a Bag from a FoodSaver Roll
Place Bag on Sealing Strip
Cut enough bag material from roll to hold item
1.
to be vacuum packaged, plus 3 inches. Be sure to
cut straight.
Open appliance lid and place one end of bag
2.
material across Sealing Strip
rubber gasket
(F)
Close lid.
3.
Press down firmly on lid with both hands and
4.
hold. Motor and Indicator Light
as bag is being sealed.
How to Vacuum Package with FoodSaver Bags
Place Bag in Vacuum Channel
Place item(s) into bag, allowing at least 3 inches of
1.
space between bag contents and top of bag.
Open appliance lid and place open end of bag
2.
down into Vacuum Channel
Close lid.
3.
To begin vacuum process, press down firmly on
4.
lid with both hands and hold. Motor and Indicator
Light
will turn on as vacuum process begins.
(A)
When motor and light turn off, release lid.
5.
Vacuum process is complete. Indicator Light
1/9/07
9:48 AM
Page 2
Press and Release Lid
, not over
(G)
.
will turn on
(A)
Press and Release Lid
.
(E)
Registering your appliance is quick and easy at www.foodsaver.com.
Press Open/Cancel Button
When motor and light turn off, release lid.
5.
Indicator Light will blink for 5 seconds as a
reminder to press Open/Cancel Button
Press Open/Cancel Button to open lid and
6.
remove bag.
Now you are ready to vacuum package with your
new bag (see below).
Press Open/Cancel Button
will blink for 5 seconds as a reminder to press
Open/Cancel Button
Press Open/Cancel Button to open lid and
6.
remove bag. Refrigerate or freeze if needed. (See
FoodSaver Reference Guide for food safety tips.)
The Open/Cancel Button can also be used to
Tip:
cancel vacuum process mid-way and open lid.
Let appliance cool down for 20 seconds
Note:
after each use.
.
(B)
.
(B)
Advertisement
