Getting Started; How To Make A Bag From A Foodsaver Roll; How To Vacuum Package With Foodsaver Bags - FoodSaver V2220 Quick Start Manual

Getting Started

Registering your appliance is quick and easy at www.foodsaver.com. If you register on our website, you will be

How to Make a Bag from a FoodSaver Roll

Place Bag on Sealing Strip
Cut enough bag material from roll to hold item,
1.
plus 3 inches. Be sure to cut straight.
Open appliance lid and place one end of bag
2.
material across Sealing Strip
Close and lock the lid using the Latch
3.
Press Seal button
4. (O)

How to Vacuum Package with FoodSaver Bags

Place Bag in Vacuum Channel
Place item(s) in bag, allowing at least 3 inches of
1.
space between bag contents and top of bag.
Open appliance lid and place open end of bag
2.
into Vacuum Channel
Close lid and use Latch
3.
Press appropriate Food Setting Button
4.
– Choose Moist for juicy foods or Dry for foods
without liquid. Appliance will default to Dry setting.
Press Vacuum & Seal Button
5.
eligible for special bag and accessory introductory offers. Refer to the registration card in the box.
2
Close and Latch Lid
.
(I)
.
(D)
.
2
Close and Latch Lid
.
(G)
to lock.
(D)
(J)
to begin vacuum
(L)
3
Press Seal Button
When Seal Indicator Light
5.
sealing is complete. Unlock latch, lift lid and
remove bag.
Now you are ready to vacuum package with your
new bag (see below).
3
Press Vacuum & Seal Button
and sealing process. Motor will continue to run until
bag is fully vacuumed, then will automatically seal.
When Seal Indicator Light
6.
latch, lift lid and remove bag. Refrigerate or freeze
if needed. (See FoodSaver Reference Guide for food
safety tips.)
Let appliance cool down for 20 seconds after
Note:
each use. Always store appliance with the Latch
in the unlocked position.
4
turns off,
(N)
5
turns off, unlock
(N)
(D)