Advertisement
2. Fix the power connection wire and signal control wire with wire clip (only for
cooling and heating unit).
Step six: neaten the pipes
1. The pipes should be placed along the wall,
bent reasonably and hidden possibly. Min.
semidiameter of bending the pipe is lOcm.
2. If the outdoor unit is higher than the wall
hole, you must set a U-shaped curve in the
pipe before pipe goes into the room, in
order to prevent rain from getting into the
room.
U-shaped curve
drain hose j_
_wall
_--
_1I
Note:
• The through-wal
height of drain hose
o Slant the drain hose slightly dow-
shouldn't be higher than the outlet
pipe hole of indoor unit.
_.
_
,
_.._
the drain hose
_I
can't raise
._. _wards.
® The water outlet can't be paced
in water in order to drain smoothly.
The ware
u_
can,t be p;a°cUe_de' _
in water
i
nwards. The drain hose can t be
curved, raised and fluctuant, etc.
C
X
The drain hose can't be fluctuant
f_
cThnet_:if/uhct_:nt
_
XThe water
-33-
Advertisement
